CenturionPro HPM High Performance Mini Bucker - Optional Stand Available

In stock

SKU

ph_bm_010

As low as $8,495.00

The HP Mini Bucker was modelled on the industry leading HP1 Bucker. HP refers to “High Performance” and utilizes two rollers that pull the stem into the machine to pop the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details
More Information

CenturionPro HPM High Performance Mini Bucker - Option Stand Available

Expanding on CenturionPro’s vision to develop an industry-leading bucker for every harvest, the HP Mini Bucker is a powerful yet affordable solution to streamline small to medium harvests.

The elite harvesting solution benefits from a 0.75 HP gear driven motor with variable speeds for formidable power and versatility. Variable speed control makes processing wet and dry plants a breeze, while stainless steel and anodized aluminium construction makes it robust and easy to clean.

The HP Mini Bucker comes with 3-hole sizes, accepts wet or dry stems up to 1/2” and can buck up to 125 pounds per hour wet (up to 25 pounds per hour dry). The elite harvesting solution benefits from a 0.75 HP gear driven motor with variable speeds for formidable power and versatility, while stainless steel and anodized aluminium construction makes it robust and easy to clean. The HP Mini Bucker plugs into a 110-volt, 15-amp circuit.

Upgrade your HP Mini Bucker to include a stand. Make the most of your processing time with added ease of de-stemming and improve portability as the bucker stands operate on a 4-wheel system.

Preparation for Use & Tips for Dry Bucking:

Environment Preparation

Ensure adequate space
Review electrical requirements
Have adequate bins for product transport
Cooler temperatures in processing room is beneficial

Plant Preparation

Cut main stalk
Seperate each individual stem (no 'y' junctions)
Leave 3" of stem for clearance into machine
Ensure clean angled cuts for precise feeding

Feeding

Keep prepped product stem side up for efficiency
Size the stem to fi t the ideal hole
Feed end first into machine
Use variable speed control to adjust flow

Moisture Content

Moisture content is critical for ensuring minimal damage to the flower
Flower that is too dry will fall apart
Flower that has too much moisture will compact and dent
For best results with dry bucking, moisture content should be between 12% and 14% when using a machine

Bud Consistency

Buds should be "springy"- when the flower is squeezed between two fingers it will rebound and return to its original shape
Both big and smaller stems must be pliable when bucking with a machine such as a GC or HP System
Pliable stems ensures that they fold and are stripped upon entering the bucking machine. If too brittle, they will simply break off and will not be properly stripped

Machine Speed

Slowing the machine speed for dry bucking will lead to a better result
Dry bucking at 1/2 or 1/3 of the regular speed will ensure better results
The variable speed control off ered by our HP Bucker is a great feature when bucking dry material

Features

Feed Throughput

+1250 lbs/hr Wet | +25 lbs/hr Dry

Feed Entry Sizes

3-hole (1/4, 3/8, & 1/2 in)

Feed Types

Wet/Dry

Roller Sets

Neoprene Rubber

Motor Pulse

Yes

Reverse Operation

Yes

Duty Cycle

Continuous

Pull Speed

10-30 in/sec

Pull Strength

>400 lbs

GMP Compliant

Yes

UL Compliant

Yes

CE Compliant

Yes

RoHS Compliant

Yes

Primary Material

304 Stainless Steel / Aluminum

Specifications

Input Voltage NA

120v/60 Hz Single Phase

EU AUS

240V/50 Hz, Single Phase

Current Draw (Operating)

<6A NA | <3A EU, AUS

Drive Motor

0.75 HP, IP54

Motor RPM

1690

Variable Speed

Yes

Weight (w/o Stand)

97 lbs / 44 kg

Length

22 in /56 cm

Width

16 in / 41 cm

Height

20 in /51 cm

Circuit Breaker Required NA

15A/120V

EU AUS

15A/220V

* Used trimming and/or extraction machines and products cannot be returned for any reason. Any warranty issue arising on a used trimming and/or extraction product must be submitted directly to the manufacturer. Refer to our Terms & Conditions for further information regarding returning unopened products. We do not guarantee the performance of trimmers, pressing devices, pruners, tumblers or extraction bags. Lack of performance WILL NOT qualify the product for a return. We do not identify the use of these machines as these are experimental products. We do not endorse any manufacturer statements or claims pertaining to trimmers, pressing devices, pruners, tumblers or extraction bags.