Gavita Pro E-Series SL 1000 DE 208-240 Volt
MUST USE GAVITA EL1 or EL2 CONTROLLER TO DIM LIGHT, DOES NOT COME WITH DIMMING KNOB
The Gavita Slim Line series is part of the 'professional' line of fixtures. Designed especially for grow rooms, these professional fixtures suit flexible and fixed installations. They are compact and come with a Repeater Bus interface (no manual control). For 208V three-phase or 240V. The reduced height make this the fixture of choice for low rooms.
Only 9.7 inch high makes the ‘Slim Line’ the shortest 240V Gavita fixture ever. Highest light output and maintenance over time. It has the HR96 reflector for the maximum efficiency and uniformity. Highly efficient passive cooling of ballast for a longer lifetime of the electronics. Sealed housing with Gore-Tex ventilation plug and controllable output up to 1150 Watt. Equipped with Repeater Bus interface which is a double-port connector on the ballast that allows you to directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port.
When lighting plants, the distance to crop a crucial factor. The right distance gives you the desired light levels and optimal uniformity. In rooms with a low ceiling or retrofits every inch matters. By optimizing the fixture for professional grows, we were able to create a ballast measuring only 9.7 inches high without compromising quality or cooling efficacy.
Repeater Bus Configuration
Gavita developed the Repeater Bus interface for fixed installations in professional environments. The Gavita difference is the double-port connector on the ballast. The active interface repeats the input signal to the output. This setup lets you directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port.
The bracket is designed to be able to change you reflector quickly. Miro aluminum can not easily be cleaned, and when you clean it, it will never be as good as a new reflector. We recommend to change reflectors every year in a “dirty” environment (dust, foggers, sprays) or every two years in a clean environment.
No Moving Parts, Optimal Thermal ManagementFeatures:
Our ballasts are completely sealed and passively cooled through the extrusion aluminum ballast housing. Our housings provide optimized thermal management, which keeps the electronics much cooler than in die-cast housings. Good thermal management is extremely important for the lifetime and reliability of the electronics.
- Slim-line ballast, only 9.7 inches high
- Highest light output and maintenance over time
- Highly efficient passive cooling of ballast for longer electronics lifetime
- Sealed housings with Gore-Tex ventilation plugs
- External control with Repeater Bus interface
- Mounting brackets for Unistrut/c-profiles available
208 Volt 240 Volt Input Current at 100% 5.2 Amps 4.5 Amps Input Current at 115% 5.9 Amps 5.2 Amps Input Power at 100% 1050 Watt 1050 Watt Input Power at 115% 1236 Watt 1236 Watt Power Factor 0.97-0.99 0.97-0.99 Lamp Base Gavita Pro Plus 1000W DE K12 x 30s Gavita Pro Plus 1000W DE K12 x 30s Reflector HR 96 DE HR 96 DE
- Additional Information
- Product Questions
Product QuestionsNo QuestionsXNOTIFY ME WHEN THIS PRODUCT IS IN STOCK: