Selection will refresh the page with new results
Hanna pH/EC/TDS Multiparameter Probe (for Use With HI9814)
The Hanna pH/EC/TDS Multiparameter Probe - HI1285-7 is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb.
Hanna pH/EC/TDS Multiparameter Probe (for Use With HI9814)The Hanna pH/EC/TDS Multiparameter Probe - HI1285-7 is a 3-in-1 pre-amplified multiparameter probe that measures pH, EC/TDS, and temperature within a single polypropylene body. The pH portion of this probe is constructed with a cloth junction, maintenance-free polymer gel electrolyte, and a low-temperature glass sensing bulb. The EC/TDS portion of this probe utilizes two stainless steel pins for an amperometric determination of conductivity and total dissolved solids.
A built-in temperature sensor ensures that both pH and EC/TDS readings are compensated for temperature variations in both standards and samples. The design consideration for the HI1285-7 is ideal for measuring the pH, EC/TDS, and temperature in greenhouses, hydroponics, and other agricultural applications. The HI1285-7 is designed for use with Hanna's Waterproof Portable pH/EC/TDS/Temperature Meter (HI9814).
- Pre-amplified pH Electrode
- Amperometric EC/TDS Sensor
- 1 probe for pH & EC/TDS
Pre-Amplified pH ElectrodeThe pH electrode circuit has a built-in amplifier that serves to reduce the effects of electrical noise on the high impedance-pH measurement. Electrical noise can come from motors and pumps that are common in greenhouses. The single reference junction design of the pH electrode has a cloth junction that allows ion movement between the inner gel electrolyte and the sample being measured. The advantage of the cloth junction is that it can be extracted from the probe, exposing a fresh surface when readings become drifty or erratic. These features make this probe ideal for use in fertilizer solutions.
Amperometric EC/TDS SensorEC/TDS readings are performed by a two-pin amperometric sensor. An alternating voltage is applied to the sensor and the amount of current that passes between the two stainless steel pins determines the amount of dissolved ionic solids present.
Built-In Temperature SensorpH and EC/TDS readings must be temperature compensated in order to obtain accurate results. The built-in temperature sensor of the HI1285-7 provides a speedy temperature reading which is then used to adjust the pH and EC/TDS results accordingly.
Polypropylene BodyThe polypropylene body of the HI1285-7 houses all three sensors within a sturdy, single body design. This body material is suitable for a wide range of applications and excels in measurements with portable meters due to its durability. The fins around the spherical glass pH bulb minimizes breakage due to accidental bumping or dropping of the electrode. The polypropylene plastic is a high-quality plastic that is chemically resistant to many aggressive chemicals.
Quick Connect DIN ConnectorThe HI1285-7 uses a Quick Connect DIN connector that makes attaching and removing the probe simple and easy. This type of connector is generally proprietary to the meters they are supplied with. The HI1285-7 is designed for use with Hanna’s HI9814 GroLine hydroponic waterproof pH/EC/TDS/Temperature portable meter.
|Description||Pre-amplified pH and EC probe|
|Junction / Flow Rate||Cloth|
|Max Pressure||0.1 bar|
|Range||pH: 0 to 13 / EC; T: 0 to 50°C (32 to 122°F) - LT|
|Tip / Shape||Spheric (dia: 8.0 mm)|
|Cable||7-pole; 1 m (3.3 ft)|
|Recommended Use||Greenhouses, hydroponics|
|Connection||Quick Connect DIN|
|Special Note||*To be used with HI9814|
|Manufacturer Part Number||HI1285-7|