Selection will refresh the page with new results
HM Digital Aquapro TDS Water Tester, AP-1
In stock
SKU
h_mt_032
$35.45
FREE SHIPPING
HM Digital’s AquaPro Series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen. The AquaPro is calibrated with a 342 ppm NaCl solution—can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
HM Digital Aquapro TDS Water Tester, AP-1
HM Digital’s AquaPro Series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen. The AquaPro is calibrated with a 342 ppm NaCl solution—can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
Features:
- Measures total dissolved solids (TDS) and temperature
- Automatic Temperature Compensation (ATC)
- Water-resistant housing
- Measurement Range: 0-5000 ppm
- Digital Calibration (push button)
- Auto-off function, data-hold function and low-battery indicator
- Display: large and easy-to-read LCD screen includes simultaneous temperature reading
- Magnetic back
- Includes a cap and batteries
Specifications
TDS Range | 0-5000 ppm (mg/L) |
Temperature Range | 0-80 °C; 32-176 °F |
Resolution | 1 ppm |
Temperature Resolution | 0.1 °C/F |
Accuracy | +/- 2% |
EC-to-TDS Conversion Factor | NaCl (avg. 0.5) |
Calibration | Digital calibration by push button |
Housing | Water-resistant |
Power Source | 1 x 3V button cell (included) (model CR2032) |
Dimensions | 15 x 2.8 x 1.3 cm (5.9 x 1.1 x .5 inches) |
Weight | 42.5 g (1.5 oz) |
SKU | h_mt_032 |
---|---|
UPC | 891144000120 |
Distributor Part Number | HMDAP1 |