Quest CDG 174 Portable Dehumidifier
Quest CDG 174 Portable Dehumidifier
Increase drying and curing times with the Quest CDG 174 Portable Dehumidifier. Made in America, this efficient portable dehumidifier features an onboard humidistat, an internal condensate pump, and a full electronic control panel.
MERV 11 FiltrationCaptures dangerous airborne particles
Internal PumpWith 33' detatchable hose
UL Rated And ETL ListedThe highest safety standard
Largest Capacity Portable DehumidifierThere is no other portable dehumidifier with this capacity
Heavy-Duty Roto CaseResists dents and scratches
Lightweight and PortableBuilt to move where needed in your space
Plug-N-PlayThe Quest 174 require no installation
Made in the USABuilt to last
Increase drying and curing times with the Quest CDG 174 Portable Dehumidifier. Made in America, this efficient portable dehumidifier features an onboard humidistat, internal condensate pump, and a full electronic control panel. This rugged dehumidifier is guaranteed to help professional growers with additional drying and curing needs.
Pump Purge OptionFor professionals, extracting and getting the moisture out is the crucial job. The Quest 174 features a pump purge option, offering both an automatic and manual option for pushing captured condense away from the dehumidifier. Purge the unit in 4 ways:
Automatic Purge:Simply allow the dehumidifier’s water reservoir to fill. The unit will purge the water automatically.
20 Second Purge:Depress the Purge button once, and the unit will purge water for 20 seconds.
30 Second Purge:Press and hold the purge button for 30 seconds of pumping.
Lastly, the dehumidifier can be emptied while the unit is off by pressing the purge button for a 30-second purge. It is highly recommended to purge the unit before and after transport and allow the unit to rest 15 minutes prior to the last purge.
The onboard humidistat carefully conditions the air to the desired pre-sets. The onboard humidistat can be set to any humidity level between 20% - 70% RH, helping professionals to regulate the right humidity.
Indoor Flexibility and ManeuveringIndoor gardens and commercial growers may have limited space to work with, and the Quest 174 provides much-needed flexibility -- and drying -- wherever it is needed. To make drying indoors more efficient, Quest features flexible portability features such as:
Semi-Pneumatic Recessed Wheels:Designed for portability, the recessed wheels effortlessly roll across uneven ground while making it easy to move the portable dehumidifier from room-to-room.
Rubber Feet:When resting in place, the Quest 174 has stabilizing rubber feet for sturdy placement.
Handle:The dehumidifier can be tip slightly backward and moved via the featured handle for placement in drying and curing areas or wherever extra drying is needed.
MERV 11 Filter:The MERV 11 filter removes particulates as small as 1 micron.
Operating Temperatures:Operates in temperatures between 33 degrees F - 110 degrees F.
Ducting:Ducting can be added to back of unit to funnel exhaust away from structure or unit.
Hours Button:View the hour meter and hours used with the Hours button.
Internal Condensate Pump:Pump captured condensate away from the unit up to 30’ with included hose.
Auto Restart:During a power outage, the unit will automatically resume operation.
Defrost Cycle:When frost and low level temperatures are detected, the Quest 174 will power down the compressor, restarting when defrosting on evaporative coils has occurred.
Made in America:The Quest 174 is proudly made in America.
|Model||4031170 174 Portable|
|Blower||380 CFM @ 0.0 in WG|
|Duct Options||Inlet: 12 in Flex-Duct; Outlet: 10 in Lay-Flat|
|Supply Voltage||220-240 VAC - 1 Phase - 60 Hz|
|Curent Draw||10 Amps|
|Water Removal||176 Pints/Day @ AHAM 80°F, 60% RH|
|Air Filter||MERV 11|
|Drain Hose Included||Yes|
|Power Cord||25 ft 14ga Power Cord|
|Dimension||23 in W x 20 in D x 40 in H|
|Manufacturer Part Number||4031170|
|Distributor Part Number||HGC700857|