Quest Hi-E Dry 195 Dehumidifier
Quest Hi-E Dry 195 Dehumidifier
Get the flexibility you need in an economical package with the Hi-E DRY 195. The Hi-E DRY 195 was designed for areas demanding higher capacity equipment to help eliminate mold, mildew and their odors. The Hi-E DRY 195 is controlled by an onboard dehumidistat adjustable from 20 to 80% RH, along with positive “On” and “Off” settings.
MERV 11 FiltrationCaptures dangerous airborne particles
Powerful AirflowMoves air through your dehumidifier at 610 CFM
UL Rated And ETL ListedThe highest safety standard
Long Power CordA 10-foot power cord is included with purchase
Internal Condensate PumpAutomatically pushes moisture to another location
Lightweight and PortableBuilt to move where needed in your space
Automatic DefrostThis function turns off the compressor and uses the fan to remove built-up frost
Made in the USABuilt to last
The new Quest Hi-E Dry 195 is a high-capacity dehumidifier designed for commercial areas with heavy moisture loads like warehouses, spa and indoor pool houses, locker rooms, and stores. Set the onboard humidistat from 20% to 80% and remove up to 192 pints of moisture at AHAM (80 F, 60% RH). An update to the popular Hi-E Dry 195, you can use it as a standalone or ducted solution in areas as low as 33 degrees F.
Note: This heavy-duty dehumidifier requires a dedicated 20-amp circuit.
Reliable for Years of Use
American-made quality means its durable to be used in the toughest environments. This updated Hi-E Dry 195 is backed with a 5-year warranty on its sealed system. Large wheels allow you to take it anywhere, and it's effective in temperatures between 33 and 110 degrees F.
You can duct this model to other rooms using the 12-inch duct inlet or duct it to let outdoor air inside (which is then run through the unit). If you don't need to duct it, just use it as a standalone model in commercial spaces.
Internal Condensate Pump
Removing large amounts of moisture doesn't have to be difficult. An internal condensate pump automatically pushes moisture to another location. A 20-foot hose is included with the Quest Hi-E Dry 195 Dehumidifier, and the condensate pump moves water up to 17 feet vertically or horizontally.
Easy to-Use Digital Display
The digital control panel shows the current room's relative humidity as well as your set humidity level. You can also adjust your set humidity level between 20% and 80% or turn the unit on or off.
Large Operating Temperature:The Hi-E Dry 195 operates in temperatures between 33 and 110 degrees F. In fact, it removes even more moisture than the previous Hi-E Dry 195 in low temperatures down to 33 degrees F.
Updated Compact Design:Large wheels and compact design (42 inches H x 20 inches W x 19 inches L) allow for more flexibility with placement.
More Efficient:Not only does it remove more moisture in lower temperatures, it also removes more moisture per kilowatt hour. The updated model pulls 5.9 pints/kwh. It requires a dedicated 20-amp circuit and 110/120-volt outlet.
MERV 11 Filter:Filter out dangerous allergens and microscopic particles from air as you remove moisture.
Long Power Cord:A 10-foot power cord is included with purchase.
Portability:Four caster wheels allow for quick and easy portability of the unit.
American-Made:Proudly made in America, the Quest Hi-E Dry 195 is manufactured in Madison, WI.
|Model||4036710 Hi-E Dry 195|
|Blower||610 CFM @ 0.0 in WG|
|Power||1500 Watts @ 80°F and 60% RH|
|Supply Voltage||110-120 VAC - 1 Phase - 60 Hz|
|Current Draw (Amps)||13.1|
|Water Removal||195 Pints/Day|
|Air Filter||MERV 11|
|Drain Hose Included||Yes|
|Drain Connection||0.75 in Threaded NPT|
|Power Cord||14ga 10 ft, NEMA 5-20P|
|Dimensions||20 in W x 42 in H x 19 in L|
|Manufacturer Part Number||4036730|
|Distributor Part Number||HGC700964, 700964|